com.lowagie.text.pdf
Class PdfPTable

java.lang.Object
  extended by com.lowagie.text.pdf.PdfPTable
All Implemented Interfaces:
Element, LargeElement

public class PdfPTable
extends java.lang.Object
implements LargeElement

This is a table that can be put at an absolute position but can also be added to the document as the class Table. In the last case when crossing pages the table always break at full rows; if a row is bigger than the page it is dropped silently to avoid infinite loops.

A PdfPTableEvent can be associated to the table to do custom drawing when the table is rendered.

Author:
Paulo Soares (psoares@consiste.pt)

Field Summary
protected  float[] absoluteWidths
           
static int BACKGROUNDCANVAS
          The index of the duplicate PdfContentByte where the background will be drawn.
static int BASECANVAS
          The index of the original PdfcontentByte.
protected  boolean complete
          Indicates if the PdfPTable is complete once added to the document.
protected  PdfPCell[] currentRow
           
protected  int currentRowIdx
           
protected  PdfPCell defaultCell
           
protected  int headerRows
          Holds value of property headerRows.
protected  boolean isColspan
           
static int LINECANVAS
          The index of the duplicate PdfContentByte where the border lines will be drawn.
protected  float[] relativeWidths
           
protected  boolean rowCompleted
          Keeps track of the completeness of the current row.
protected  java.util.ArrayList rows
           
protected  int runDirection
           
protected  float spacingAfter
          The spacing after the table.
protected  float spacingBefore
          The spacing before the table.
protected  PdfPTableEvent tableEvent
           
static int TEXTCANVAS
          The index of the duplicate PdfContentByte where the text will be drawn.
protected  float totalHeight
           
protected  float totalWidth
           
protected  float widthPercentage
          Holds value of property widthPercentage.
 
Fields inherited from interface com.lowagie.text.Element
ALIGN_BASELINE, ALIGN_BOTTOM, ALIGN_CENTER, ALIGN_JUSTIFIED, ALIGN_JUSTIFIED_ALL, ALIGN_LEFT, ALIGN_MIDDLE, ALIGN_RIGHT, ALIGN_TOP, ALIGN_UNDEFINED, ANCHOR, ANNOTATION, AUTHOR, CCITT_BLACKIS1, CCITT_ENCODEDBYTEALIGN, CCITT_ENDOFBLOCK, CCITT_ENDOFLINE, CCITTG3_1D, CCITTG3_2D, CCITTG4, CELL, CHAPTER, CHUNK, CREATIONDATE, CREATOR, HEADER, IMGRAW, IMGTEMPLATE, JBIG2, JPEG, JPEG2000, KEYWORDS, LIST, LISTITEM, MARKED, MULTI_COLUMN_TEXT, PARAGRAPH, PHRASE, PRODUCER, PTABLE, RECTANGLE, ROW, SECTION, SUBJECT, TABLE, TITLE, YMARK
 
Constructor Summary
protected PdfPTable()
           
  PdfPTable(float[] relativeWidths)
          Constructs a PdfPTable with the relative column widths.
  PdfPTable(int numColumns)
          Constructs a PdfPTable with numColumns columns.
  PdfPTable(PdfPTable table)
          Constructs a copy of a PdfPTable.
 
Method Summary
 void addCell(Image image)
          Adds an Image as Cell.
 void addCell(PdfPCell cell)
          Adds a cell element.
 void addCell(PdfPTable table)
          Adds a nested table.
 void addCell(Phrase phrase)
          Adds a cell element.
 void addCell(java.lang.String text)
          Adds a cell element.
protected  PdfPRow adjustCellsInRow(int start, int end)
          Calculates the extra height needed in a row because of rowspans.
static PdfContentByte[] beginWritingRows(PdfContentByte canvas)
          Gets and initializes the 4 layers where the table is written to.
 float calculateHeights(boolean firsttime)
          Calculates the heights of the table.
 void calculateHeightsFast()
          Calculates the heights of the table.
protected  void calculateWidths()
           
 void completeRow()
          Completes the current row with the default cell.
protected  void copyFormat(PdfPTable sourceTable)
          Copies the format of the sourceTable without copying the content.
 void deleteBodyRows()
          Removes all of the rows except headers
 boolean deleteLastRow()
          Deletes the last row in the table.
 boolean deleteRow(int rowNumber)
          Deletes a row from the table.
static void endWritingRows(PdfContentByte[] canvases)
          Finishes writing the table.
 void flushContent()
          Flushes the content that has been added.
 float[] getAbsoluteWidths()
          Gets the absolute sizes of each column width.
 java.util.ArrayList getChunks()
          Gets all the chunks in this element.
 PdfPCell getDefaultCell()
          Gets the default PdfPCell that will be used as reference for all the addCell methods except addCell(PdfPCell).
 float getFooterHeight()
          Gets the height of the rows that constitute the footer as defined by setFooterRows().
 int getFooterRows()
          Gets the number of rows in the footer.
 float getHeaderHeight()
          Gets the height of the rows that constitute the header as defined by setHeaderRows().
 int getHeaderRows()
          Gets the number of the rows that constitute the header.
 int getHorizontalAlignment()
          Gets the horizontal alignment of the table relative to the page.
 boolean getKeepTogether()
          Getter for property keepTogether
 int getNumberOfColumns()
          Returns the number of columns.
 PdfPRow getRow(int idx)
          Gets a row with a given index (added by Jin-Hsia Yang).
 float getRowHeight(int idx)
          Gets the height of a particular row.
 float getRowHeight(int idx, boolean firsttime)
          Gets the height of a particular row.
 java.util.ArrayList getRows()
          Gets an arraylist with all the rows in the table.
 java.util.ArrayList getRows(int start, int end)
          Gets an arraylist with a selection of rows.
 float getRowspanHeight(int rowIndex, int cellIndex)
          Gets the maximum height of a cell in a particular row (will only be different from getRowHeight is one of the cells in the row has a rowspan > 1).
 int getRunDirection()
          Returns the run direction of the contents in the table.
 PdfPTableEvent getTableEvent()
          Gets the table event for this page.
 float getTotalHeight()
          Gets the total height of the table.
 float getTotalWidth()
          Gets the full width of the table.
 float getWidthPercentage()
          Gets the width percentage that the table will occupy in the page.
 boolean isComplete()
          Indicates if the element is complete or not.
 boolean isContent()
          Checks if this element is a content object.
 boolean isExtendLastRow()
          Gets the value of the last row extension.
 boolean isHeadersInEvent()
          Gets the header status inclusion in PdfPTableEvent.
 boolean isLockedWidth()
          Getter for property lockedWidth.
 boolean isNestable()
          Checks if this element is nestable.
 boolean isSkipFirstHeader()
          Tells you if the first header needs to be skipped (for instance if the header says "continued from the previous page").
 boolean isSkipLastFooter()
          Tells you if the last footer needs to be skipped (for instance if the footer says "continued on the next page")
 boolean isSplitLate()
          Gets the property splitLate.
 boolean isSplitRows()
          Gets the split value.
 boolean process(ElementListener listener)
          Processes the element by adding it (or the different parts) to an ElementListener.
 void setComplete(boolean complete)
          If you invoke setComplete(false), you indicate that the content of the object isn't complete yet; it can be added to the document partially, but more will follow.
 void setExtendLastRow(boolean extendLastRow)
          When set the last row will be extended to fill all the remaining space to the bottom boundary.
 void setFooterRows(int footerRows)
          Sets the number of rows to be used for the footer.
 void setHeaderRows(int headerRows)
          Sets the number of the top rows that constitute the header.
 void setHeadersInEvent(boolean headersInEvent)
          When set the PdfPTableEvent will include the headers.
 void setHorizontalAlignment(int horizontalAlignment)
          Sets the horizontal alignment of the table relative to the page.
 void setKeepTogether(boolean keepTogether)
          If true the table will be kept on one page if it fits, by forcing a new page if it doesn't fit on the current page.
 void setLockedWidth(boolean lockedWidth)
          Uses the value in setTotalWidth() in Document.add().
 void setRunDirection(int runDirection)
          Sets the run direction of the contents of the table.
 void setSkipFirstHeader(boolean skipFirstHeader)
          Skips the printing of the first header.
 void setSkipLastFooter(boolean skipLastFooter)
          Skips the printing of the last footer.
 void setSpacingAfter(float spacing)
          Sets the spacing after this table.
 void setSpacingBefore(float spacing)
          Sets the spacing before this table.
 void setSplitLate(boolean splitLate)
          If true the row will only split if it's the first one in an empty page.
 void setSplitRows(boolean splitRows)
          When set the rows that won't fit in the page will be split.
 void setTableEvent(PdfPTableEvent event)
          Sets the table event for this table.
 void setTotalWidth(float totalWidth)
          Sets the full width of the table.
 void setTotalWidth(float[] columnWidth)
          Sets the full width of the table from the absolute column width.
 void setWidthPercentage(float widthPercentage)
          Sets the width percentage that the table will occupy in the page.
 void setWidthPercentage(float[] columnWidth, Rectangle pageSize)
          Sets the percentage width of the table from the absolute column width.
 void setWidths(float[] relativeWidths)
          Sets the relative widths of the table.
 void setWidths(int[] relativeWidths)
          Sets the relative widths of the table.
static PdfPTable shallowCopy(PdfPTable table)
          Makes a shallow copy of a table (format without content).
 int size()
          Gets the number of rows in this table.
 float spacingAfter()
          Gets the spacing after this table.
 float spacingBefore()
          Gets the spacing before this table.
 int type()
          Gets the type of the text element.
 float writeSelectedRows(int rowStart, int rowEnd, float xPos, float yPos, PdfContentByte canvas)
          Writes the selected rows to the document.
 float writeSelectedRows(int rowStart, int rowEnd, float xPos, float yPos, PdfContentByte[] canvases)
          Writes the selected rows to the document.
 float writeSelectedRows(int colStart, int colEnd, int rowStart, int rowEnd, float xPos, float yPos, PdfContentByte canvas)
          Writes the selected rows and columns to the document.
 float writeSelectedRows(int colStart, int colEnd, int rowStart, int rowEnd, float xPos, float yPos, PdfContentByte[] canvases)
          Writes the selected rows and columns to the document.
 
Methods inherited from class java.lang.Object
clone, equals, finalize, getClass, hashCode, notify, notifyAll, toString, wait, wait, wait
 
Methods inherited from interface com.lowagie.text.Element
toString
 

Field Detail

BASECANVAS

public static final int BASECANVAS
The index of the original PdfcontentByte.

See Also:
Constant Field Values

BACKGROUNDCANVAS

public static final int BACKGROUNDCANVAS
The index of the duplicate PdfContentByte where the background will be drawn.

See Also:
Constant Field Values

LINECANVAS

public static final int LINECANVAS
The index of the duplicate PdfContentByte where the border lines will be drawn.

See Also:
Constant Field Values

TEXTCANVAS

public static final int TEXTCANVAS
The index of the duplicate PdfContentByte where the text will be drawn.

See Also:
Constant Field Values

rows

protected java.util.ArrayList rows

totalHeight

protected float totalHeight

currentRow

protected PdfPCell[] currentRow

currentRowIdx

protected int currentRowIdx

defaultCell

protected PdfPCell defaultCell

totalWidth

protected float totalWidth

relativeWidths

protected float[] relativeWidths

absoluteWidths

protected float[] absoluteWidths

tableEvent

protected PdfPTableEvent tableEvent

headerRows

protected int headerRows
Holds value of property headerRows.


widthPercentage

protected float widthPercentage
Holds value of property widthPercentage.


isColspan

protected boolean isColspan

runDirection

protected int runDirection

spacingBefore

protected float spacingBefore
The spacing before the table.


spacingAfter

protected float spacingAfter
The spacing after the table.


complete

protected boolean complete
Indicates if the PdfPTable is complete once added to the document.

Since:
iText 2.0.8

rowCompleted

protected boolean rowCompleted
Keeps track of the completeness of the current row.

Since:
2.1.6
Constructor Detail

PdfPTable

protected PdfPTable()

PdfPTable

public PdfPTable(float[] relativeWidths)
Constructs a PdfPTable with the relative column widths.

Parameters:
relativeWidths - the relative column widths

PdfPTable

public PdfPTable(int numColumns)
Constructs a PdfPTable with numColumns columns.

Parameters:
numColumns - the number of columns

PdfPTable

public PdfPTable(PdfPTable table)
Constructs a copy of a PdfPTable.

Parameters:
table - the PdfPTable to be copied
Method Detail

shallowCopy

public static PdfPTable shallowCopy(PdfPTable table)
Makes a shallow copy of a table (format without content).

Parameters:
table -
Returns:
a shallow copy of the table

copyFormat

protected void copyFormat(PdfPTable sourceTable)
Copies the format of the sourceTable without copying the content.

Parameters:
sourceTable -
Since:
2.1.6 private is now protected

setWidths

public void setWidths(float[] relativeWidths)
               throws DocumentException
Sets the relative widths of the table.

Parameters:
relativeWidths - the relative widths of the table.
Throws:
DocumentException - if the number of widths is different than the number of columns

setWidths

public void setWidths(int[] relativeWidths)
               throws DocumentException
Sets the relative widths of the table.

Parameters:
relativeWidths - the relative widths of the table.
Throws:
DocumentException - if the number of widths is different than the number of columns

calculateWidths

protected void calculateWidths()
Since:
2.1.6 private is now protected

setTotalWidth

public void setTotalWidth(float totalWidth)
Sets the full width of the table.

Parameters:
totalWidth - the full width of the table.

setTotalWidth

public void setTotalWidth(float[] columnWidth)
                   throws DocumentException
Sets the full width of the table from the absolute column width.

Parameters:
columnWidth - the absolute width of each column
Throws:
DocumentException - if the number of widths is different than the number of columns

setWidthPercentage

public void setWidthPercentage(float[] columnWidth,
                               Rectangle pageSize)
                        throws DocumentException
Sets the percentage width of the table from the absolute column width.

Parameters:
columnWidth - the absolute width of each column
pageSize - the page size
Throws:
DocumentException

getTotalWidth

public float getTotalWidth()
Gets the full width of the table.

Returns:
the full width of the table

calculateHeights

public float calculateHeights(boolean firsttime)
Calculates the heights of the table.

Parameters:
firsttime - if true, the heights of the rows will be recalculated. This takes time; normally the heights of the rows are already calcultated, so in most cases, it's save to use false as parameter.
Returns:
the total height of the table. Note that it will be 0 if you didn't specify the width of the table with setTotalWidth().
Since:
2.1.5 added a parameter and a return type to an existing method, and made it public

calculateHeightsFast

public void calculateHeightsFast()
Calculates the heights of the table.


getDefaultCell

public PdfPCell getDefaultCell()
Gets the default PdfPCell that will be used as reference for all the addCell methods except addCell(PdfPCell).

Returns:
default PdfPCell

addCell

public void addCell(PdfPCell cell)
Adds a cell element.

Parameters:
cell - the cell element

addCell

public void addCell(java.lang.String text)
Adds a cell element.

Parameters:
text - the text for the cell

addCell

public void addCell(PdfPTable table)
Adds a nested table.

Parameters:
table - the table to be added to the cell

addCell

public void addCell(Image image)
Adds an Image as Cell.

Parameters:
image - the Image to add to the table. This image will fit in the cell

addCell

public void addCell(Phrase phrase)
Adds a cell element.

Parameters:
phrase - the Phrase to be added to the cell

writeSelectedRows

public float writeSelectedRows(int rowStart,
                               int rowEnd,
                               float xPos,
                               float yPos,
                               PdfContentByte[] canvases)
Writes the selected rows to the document. canvases is obtained from beginWritingRows().

Parameters:
rowStart - the first row to be written, zero index
rowEnd - the last row to be written + 1. If it is -1 all the rows to the end are written
xPos - the x write coordinate
yPos - the y write coordinate
canvases - an array of 4 PdfContentByte obtained from beginWrittingRows()
Returns:
the y coordinate position of the bottom of the last row
See Also:
beginWritingRows(com.lowagie.text.pdf.PdfContentByte)

writeSelectedRows

public float writeSelectedRows(int colStart,
                               int colEnd,
                               int rowStart,
                               int rowEnd,
                               float xPos,
                               float yPos,
                               PdfContentByte[] canvases)
Writes the selected rows and columns to the document. This method does not clip the columns; this is only important if there are columns with colspan at boundaries. canvases is obtained from beginWritingRows(). The table event is only fired for complete rows.

Parameters:
colStart - the first column to be written, zero index
colEnd - the last column to be written + 1. If it is -1 all the columns to the end are written
rowStart - the first row to be written, zero index
rowEnd - the last row to be written + 1. If it is -1 all the rows to the end are written
xPos - the x write coordinate
yPos - the y write coordinate
canvases - an array of 4 PdfContentByte obtained from beginWritingRows()
Returns:
the y coordinate position of the bottom of the last row
See Also:
beginWritingRows(com.lowagie.text.pdf.PdfContentByte)

writeSelectedRows

public float writeSelectedRows(int rowStart,
                               int rowEnd,
                               float xPos,
                               float yPos,
                               PdfContentByte canvas)
Writes the selected rows to the document.

Parameters:
rowStart - the first row to be written, zero index
rowEnd - the last row to be written + 1. If it is -1 all the rows to the end are written
xPos - the x write coordinate
yPos - the y write coordinate
canvas - the PdfContentByte where the rows will be written to
Returns:
the y coordinate position of the bottom of the last row

writeSelectedRows

public float writeSelectedRows(int colStart,
                               int colEnd,
                               int rowStart,
                               int rowEnd,
                               float xPos,
                               float yPos,
                               PdfContentByte canvas)
Writes the selected rows and columns to the document. This method clips the columns; this is only important if there are columns with colspan at boundaries. The table event is only fired for complete rows.

Parameters:
colStart - the first column to be written, zero index
colEnd - the last column to be written + 1. If it is -1 all the columns to the end are written
rowStart - the first row to be written, zero index
rowEnd - the last row to be written + 1. If it is -1 all the rows to the end are written
xPos - the x write coordinate
yPos - the y write coordinate
canvas - the PdfContentByte where the rows will be written to
Returns:
the y coordinate position of the bottom of the last row

beginWritingRows

public static PdfContentByte[] beginWritingRows(PdfContentByte canvas)
Gets and initializes the 4 layers where the table is written to. The text or graphics are added to one of the 4 PdfContentByte returned with the following order:

The layers are placed in sequence on top of each other.

Parameters:
canvas - the PdfContentByte where the rows will be written to
Returns:
an array of 4 PdfContentByte
See Also:
writeSelectedRows(int, int, float, float, PdfContentByte[])

endWritingRows

public static void endWritingRows(PdfContentByte[] canvases)
Finishes writing the table.

Parameters:
canvases - the array returned by beginWritingRows()

size

public int size()
Gets the number of rows in this table.

Returns:
the number of rows in this table

getTotalHeight

public float getTotalHeight()
Gets the total height of the table.

Returns:
the total height of the table

getRowHeight

public float getRowHeight(int idx)
Gets the height of a particular row.

Parameters:
idx - the row index (starts at 0)
Returns:
the height of a particular row

getRowHeight

public float getRowHeight(int idx,
                          boolean firsttime)
Gets the height of a particular row.

Parameters:
idx - the row index (starts at 0)
firsttime - is this the first time the row heigh is calculated?
Returns:
the height of a particular row
Since:
3.0.0

getRowspanHeight

public float getRowspanHeight(int rowIndex,
                              int cellIndex)
Gets the maximum height of a cell in a particular row (will only be different from getRowHeight is one of the cells in the row has a rowspan > 1).

Parameters:
rowIndex - the row index
cellIndex - the cell index
Returns:
the height of a particular row including rowspan
Since:
2.1.6

getHeaderHeight

public float getHeaderHeight()
Gets the height of the rows that constitute the header as defined by setHeaderRows().

Returns:
the height of the rows that constitute the header and footer

getFooterHeight

public float getFooterHeight()
Gets the height of the rows that constitute the footer as defined by setFooterRows().

Returns:
the height of the rows that constitute the footer
Since:
2.1.1

deleteRow

public boolean deleteRow(int rowNumber)
Deletes a row from the table.

Parameters:
rowNumber - the row to be deleted
Returns:
true if the row was deleted

deleteLastRow

public boolean deleteLastRow()
Deletes the last row in the table.

Returns:
true if the last row was deleted

deleteBodyRows

public void deleteBodyRows()
Removes all of the rows except headers


getNumberOfColumns

public int getNumberOfColumns()
Returns the number of columns.

Returns:
the number of columns.
Since:
2.1.1

getHeaderRows

public int getHeaderRows()
Gets the number of the rows that constitute the header.

Returns:
the number of the rows that constitute the header

setHeaderRows

public void setHeaderRows(int headerRows)
Sets the number of the top rows that constitute the header. This header has only meaning if the table is added to Document and the table crosses pages.

Parameters:
headerRows - the number of the top rows that constitute the header

getChunks

public java.util.ArrayList getChunks()
Gets all the chunks in this element.

Specified by:
getChunks in interface Element
Returns:
an ArrayList

type

public int type()
Gets the type of the text element.

Specified by:
type in interface Element
Returns:
a type

isContent

public boolean isContent()
Description copied from interface: Element
Checks if this element is a content object. If not, it's a metadata object.

Specified by:
isContent in interface Element
Returns:
true if this is a 'content' element; false if this is a 'metadata' element
Since:
iText 2.0.8
See Also:
Element.isContent()

isNestable

public boolean isNestable()
Description copied from interface: Element
Checks if this element is nestable.

Specified by:
isNestable in interface Element
Returns:
true if this element can be nested inside other elements.
Since:
iText 2.0.8
See Also:
Element.isNestable()

process

public boolean process(ElementListener listener)
Processes the element by adding it (or the different parts) to an ElementListener.

Specified by:
process in interface Element
Parameters:
listener - an ElementListener
Returns:
true if the element was processed successfully

getWidthPercentage

public float getWidthPercentage()
Gets the width percentage that the table will occupy in the page.

Returns:
the width percentage that the table will occupy in the page

setWidthPercentage

public void setWidthPercentage(float widthPercentage)
Sets the width percentage that the table will occupy in the page.

Parameters:
widthPercentage - the width percentage that the table will occupy in the page

getHorizontalAlignment

public int getHorizontalAlignment()
Gets the horizontal alignment of the table relative to the page.

Returns:
the horizontal alignment of the table relative to the page

setHorizontalAlignment

public void setHorizontalAlignment(int horizontalAlignment)
Sets the horizontal alignment of the table relative to the page. It only has meaning if the width percentage is less than 100%.

Parameters:
horizontalAlignment - the horizontal alignment of the table relative to the page

getRow

public PdfPRow getRow(int idx)
Gets a row with a given index (added by Jin-Hsia Yang).

Parameters:
idx -
Returns:
the row at position idx

getRows

public java.util.ArrayList getRows()
Gets an arraylist with all the rows in the table.

Returns:
an arraylist

getRows

public java.util.ArrayList getRows(int start,
                                   int end)
Gets an arraylist with a selection of rows.

Parameters:
start - the first row in the selection
end - the first row that isn't part of the selection
Returns:
a selection of rows
Since:
2.1.6

adjustCellsInRow

protected PdfPRow adjustCellsInRow(int start,
                                   int end)
Calculates the extra height needed in a row because of rowspans.

Parameters:
start - the index of the start row (the one to adjust)
end - the index of the end row on the page
Since:
2.1.6

setTableEvent

public void setTableEvent(PdfPTableEvent event)
Sets the table event for this table.

Parameters:
event - the table event for this table

getTableEvent

public PdfPTableEvent getTableEvent()
Gets the table event for this page.

Returns:
the table event for this page

getAbsoluteWidths

public float[] getAbsoluteWidths()
Gets the absolute sizes of each column width.

Returns:
he absolute sizes of each column width

isSkipFirstHeader

public boolean isSkipFirstHeader()
Tells you if the first header needs to be skipped (for instance if the header says "continued from the previous page").

Returns:
Value of property skipFirstHeader.

isSkipLastFooter

public boolean isSkipLastFooter()
Tells you if the last footer needs to be skipped (for instance if the footer says "continued on the next page")

Returns:
Value of property skipLastFooter.
Since:
2.1.6

setSkipFirstHeader

public void setSkipFirstHeader(boolean skipFirstHeader)
Skips the printing of the first header. Used when printing tables in succession belonging to the same printed table aspect.

Parameters:
skipFirstHeader - New value of property skipFirstHeader.

setSkipLastFooter

public void setSkipLastFooter(boolean skipLastFooter)
Skips the printing of the last footer. Used when printing tables in succession belonging to the same printed table aspect.

Parameters:
skipLastFooter - New value of property skipLastFooter.
Since:
2.1.6

setRunDirection

public void setRunDirection(int runDirection)
Sets the run direction of the contents of the table.

Parameters:
runDirection - One of the following values: PdfWriter.RUN_DIRECTION_DEFAULT, PdfWriter.RUN_DIRECTION_NO_BIDI, PdfWriter.RUN_DIRECTION_LTR or PdfWriter.RUN_DIRECTION_RTL.

getRunDirection

public int getRunDirection()
Returns the run direction of the contents in the table.

Returns:
One of the following values: PdfWriter.RUN_DIRECTION_DEFAULT, PdfWriter.RUN_DIRECTION_NO_BIDI, PdfWriter.RUN_DIRECTION_LTR or PdfWriter.RUN_DIRECTION_RTL.

isLockedWidth

public boolean isLockedWidth()
Getter for property lockedWidth.

Returns:
Value of property lockedWidth.

setLockedWidth

public void setLockedWidth(boolean lockedWidth)
Uses the value in setTotalWidth() in Document.add().

Parameters:
lockedWidth - true to use the value in setTotalWidth() in Document.add()

isSplitRows

public boolean isSplitRows()
Gets the split value.

Returns:
true to split; false otherwise

setSplitRows

public void setSplitRows(boolean splitRows)
When set the rows that won't fit in the page will be split. Note that it takes at least twice the memory to handle a split table row than a normal table. true by default.

Parameters:
splitRows - true to split; false otherwise

setSpacingBefore

public void setSpacingBefore(float spacing)
Sets the spacing before this table.

Parameters:
spacing - the new spacing

setSpacingAfter

public void setSpacingAfter(float spacing)
Sets the spacing after this table.

Parameters:
spacing - the new spacing

spacingBefore

public float spacingBefore()
Gets the spacing before this table.

Returns:
the spacing

spacingAfter

public float spacingAfter()
Gets the spacing after this table.

Returns:
the spacing

isExtendLastRow

public boolean isExtendLastRow()
Gets the value of the last row extension.

Returns:
true if the last row will extend; false otherwise

setExtendLastRow

public void setExtendLastRow(boolean extendLastRow)
When set the last row will be extended to fill all the remaining space to the bottom boundary.

Parameters:
extendLastRow - true to extend the last row; false otherwise

isHeadersInEvent

public boolean isHeadersInEvent()
Gets the header status inclusion in PdfPTableEvent.

Returns:
true if the headers are included; false otherwise

setHeadersInEvent

public void setHeadersInEvent(boolean headersInEvent)
When set the PdfPTableEvent will include the headers.

Parameters:
headersInEvent - true to include the headers; false otherwise

isSplitLate

public boolean isSplitLate()
Gets the property splitLate.

Returns:
the property splitLate

setSplitLate

public void setSplitLate(boolean splitLate)
If true the row will only split if it's the first one in an empty page. It's true by default. It's only meaningful if setSplitRows(true).

Parameters:
splitLate - the property value

setKeepTogether

public void setKeepTogether(boolean keepTogether)
If true the table will be kept on one page if it fits, by forcing a new page if it doesn't fit on the current page. The default is to split the table over multiple pages.

Parameters:
keepTogether - whether to try to keep the table on one page

getKeepTogether

public boolean getKeepTogether()
Getter for property keepTogether

Returns:
true if it is tried to keep the table on one page; false otherwise

getFooterRows

public int getFooterRows()
Gets the number of rows in the footer.

Returns:
the number of rows in the footer

setFooterRows

public void setFooterRows(int footerRows)
Sets the number of rows to be used for the footer. The number of footer rows are subtracted from the header rows. For example, for a table with two header rows and one footer row the code would be:
 table.setHeaderRows(3);
 table.setFooterRows(1);
 
Row 0 and 1 will be the header rows and row 2 will be the footer row.

Parameters:
footerRows - the number of rows to be used for the footer

completeRow

public void completeRow()
Completes the current row with the default cell. An incomplete row will be dropped but calling this method will make sure that it will be present in the table.


flushContent

public void flushContent()
Description copied from interface: LargeElement
Flushes the content that has been added.

Specified by:
flushContent in interface LargeElement
Since:
iText 2.0.8
See Also:
LargeElement.flushContent()

isComplete

public boolean isComplete()
Description copied from interface: LargeElement
Indicates if the element is complete or not.

Specified by:
isComplete in interface LargeElement
Returns:
indicates if the element is complete according to the user.
Since:
iText 2.0.8
See Also:
LargeElement.isComplete()

setComplete

public void setComplete(boolean complete)
Description copied from interface: LargeElement
If you invoke setComplete(false), you indicate that the content of the object isn't complete yet; it can be added to the document partially, but more will follow. If you invoke setComplete(true), you indicate that you won't add any more data to the object.

Specified by:
setComplete in interface LargeElement
Parameters:
complete - false if you'll be adding more data after adding the object to the document.
Since:
iText 2.0.8
See Also:
LargeElement.setComplete(boolean)


iText 2.1.7