Hii my os is win xp professional ��am following the below steps to install a DKU5 driver��.it works fine but as soon as I restart I have to uninstall everything and follow the below steps again�..
Instructions to install dku5 driver in winxp�..
1. Install the DKU-5 drivers, without plug the cable from the following website
http://www.nokia.com/nokia/0,5184,5447,00.html restart the system
2. Install the Nokia pC suite software, again without plug the cable. From
http://www.nokia.com/nokia/0,,54690,00.html restart the system
3. Install the drivers for TUSB3410. This driver creates a virtual COM port based on a USB connection.
You can find the driver at:
http://focus.ti.com/docs/prod/folde...t/tusb3410.html there's a lot of information on that page, but you can find the ling at the bottom, with the label:
"TI Virtual COM Port Windows Drivers and Firmware"
4. Once the TUSB3410 driver is installed, now you can plug the USB cable on you usb port, without be connected to the phone.
You 'll see a message informing that windows found a TYSB3410 device and couldn't find the driver. Select the option to locate the driver yourself, selecting the folder where the driver was installed (commonly, c:\Program Files\Texas Instruments\USB-Serial Adapter).
This message will appear twice, once for the new device and the other for the new port.
5. Finaly, you can plag the phone to the cable.
6. Open the Nokia connection manager, select Serial Cabe DKU-5, click on setup, and select the new "USB - Serial Port (COMx)"
Notice that
you should do this step every time you unplug the cable. This is because the port is removed when the cable is unplugged.
Soo my problem is even if I don�t unplug the cable I need to follow the whole process after a restart!!!